首页 > 文章列表 > NTP配置实例分析

NTP配置实例分析

ntp
126 2023-05-10

一、网络设备作为NTP服务器配置。

1、配置NTP主时钟
ntp-service refclock-master 2
2.开启NTP认证
ntp-service authentication enable
3、配置NTP时钟源本地接口,可以不配置。
ntp-service source-interface loopback0
4、配置NTP服务器服务认证密码
ntp-service authentication-keyid 1 authentication-mode md5 cipher admin
5、配置可信秘钥号
ntp-service reliable authentication-keyid 1
6、开启NTP服务器功能
undo ntp-service disable
二、网络设备作为NTP客户端配置。

1.开启NTP认证
ntp-service authentication enable
2、配置NTP服务认证密码
ntp-service authentication-keyid 1 authentication-mode md5 cipher admin
3、配置秘钥号

ntp-service reliable authentication-keyid 1

4、配置NTP服务器地址
ntp-service unicast-server  192.168.1.1

三、查看NTP各种状态
1、查看本地设备的NTP会话信息。

display ntp-service sessions
2、查看本地设备NTP会话的详细信息
display ntp-service sessions verbose
3、查看从本地设备到参考时钟源的路径
display ntp-service trace
4、查看NTP报文的统计信息
display ntp-service statistics packet
5、查看最新的10条时钟不同步原因

display ntp-service event clock-unsync
查看最新的10条时钟不同步原因

注意:H3C的设备要手动指定clock protocol ntp,否则不会同步